Daihatsu Hijet trucks are powered with a 550cc engine (those manufactured before 1990) or a 660 cc engine (those manufactured before 1990). As far as its transmission goes, it has a 3 speed automatic or 5 speed manual with 4wD and RWD drive trains. It is very well capable of around 45mpg and can deliver 40 to 50 hp depending upon the model. It comes fitted with hydraulic dump beds, hydraulic scissors, and bed-mounted cranes. Later you have many options to customize it according to your requirements.
Daihatsu Hijet is said to be the most well-manufactured mid-range mini truck. However, it also has its own set of problems that you may face if not maintained well. Mini truck owners often don't have much idea about maintenance other than changing oil and filters. If you expect superior performance from your Daihatsu Hijet Mini Truck, you should be aware of some common problems and maintenance.
Daihatsu Hijet Mini Truck Problems and Solution
Oil Leakage Problem - From time to time, you need to check the engine oil level to avoid unpleasant surprises. Oil leaks are one of the frequent problems reported with the Daihatsu Hijet mini truck. This is where a good maintenance practice will help you keep these problems under control.
Solution: Make sure to regularly check the hygiene of your engine oils, coolants, and greases. Replace rocker cover gasket for optimal performance.
Stiff Accelerator Pedal - Another common problem is stiffness in the gas pedal. This tightness is caused when the accelerator cable seized up.
Solution - In this case of this issue, you will need to replace the accelerator cable. Make sure the new one fits properly.
Don’t use low quality parts.
Prop-Shaft - Prop shafts mainly transmit the rotational torque right from the gearbox and engine to the axle. Daihatsu Hijet Mini Truck develops problems with prop shaft sooner than other types of mini trucks such as Cushman. You can hear the clinking noise, when you pull away or when you change gear.
Solution - Replace the prop shaft universal joints to fix the problem. Ensure regular service.
Door Handle Failure - Well, we all know if we don't spend time and money on maintenance of our mini truck, there are bound to be mechanical failures in the vehicle. A door handle is the first thing that gets affected by the poor maintenance of Daihatsu Hijet.
Solution - Replace the broken door handles. And start practicing proper servicing and detailing if required.
Overheating Engine - Overheating of the engine may occur for several reasons. From overworking to poor maintenance, it could be anything. Basically, it's because something gets wrong within the cooling system, and heat isn't able to escape the engine compartment.
Solution - The coolant system is very prone to air locking. It’s common, but it doesn’t mean that you need to replace any parts. Simply flush the coolant liquid and replace it.
Daihatsu Hijet Mini Trucks need to be serviced and get parts replaced regularly. Spending time in repair and maintenance will ensure the smooth and seamless functionality of your Daihatsu Hijet. Make sure you buy only OEM quality
Daihatsu mini truck Parts and
mini truck accessories to get perfect alignment and high efficiency. This little effort in maintenance will give you a perfect drive.
If you are looking for high-quality Daihatsu Hijet mini truck parts, log on to our site and choose from a range of authentic products.
Comments
Post a Comment